Infrastructure Development Code


Coordinates shall be supplied as follows:

  1. X and Y coordinates and Z heights shall be supplied and measured as detailed in Councils guideline Electronic As-Builts and Infrastructure Asset Attributes.
  2. X, Y shall be in New Zealand Transverse Mercator (NZTM) Coordinates or Geodetic 2000 Bay of Plenty Circuit.
  3. Z levels (including contours) shall be in terms of NZVD2016 Datum.
  4. Coordinates of all features shall be within the following accuracy:
    1. X, Y shall be within +/- 0.1m.
    2. Z shall be within +/- 0.01m.

Definitions in this section