× Search
  1. Home
  2. General
  3. Infrastructure Development Processes
  4. Quality Assurance Information Requirements
    1. QA-1 Resource Consent Application Requirements
    2. QA-2 Works Undertaken By or For a Council
    3. QA-3 Development Works Approval
    4. QA-4 Survey Plan (s223) Approval
    5. QA-5 Final Sign Off (s224c) Application Requirements
    6. QA-6 As-Built Information
    7. QA-7 Bonds and Maintenance Fee
    8. QA-8 Building Consent Considerations
  5. Design Standards
    1. DS-1 General Provisions
    2. DS-2 Streetscape
    3. DS-3 Reserves
    4. DS-4 Transportation Network
    5. DS-5 Stormwater
    6. DS-6 Wastewater
    7. DS-7 Water Supply
    8. DS-8 Public Lighting
    9. DS-9 Network Utilities
    10. DS-10 Natural Hazards & Earthworks
    11. DS-11 Road Zone/Road Reserve Occupancy
    12. DS-12 Building Consent Considerations
  6. Standard Drawings
    1. SD-1 General Provisions
    2. Street design diagrams
    3. T100 Perspective Drawings
    4. T200 Streetscape
    5. T300 Reserves
    6. T400 Transport Network
    7. T500 Stormwater
    8. T600 Wastewater
    9. T700 Water Supply
    10. T800 Public Lighting
    11. AB As-Built Drawings
  7. Approved Materials
  8. Construction Standards
    1. CS-1 General
    2. CS-2 Site Clearance
    3. CS-3 Earthworks
    4. CS-4 Excavation
    5. CS-5 Excavation in Trench
    6. CS-6 Fill
    7. CS-7 Bedding & Backfill
    8. CS-8 Subsoil Drainage for Earthworks & Roads
    9. CS-9 Pipework
    10. CS-10 Pipe Fittings
    11. CS-11 Manholes & Rodding Eyes
    12. CS-12 Sumps
    13. CS-13 Trenchless Technology
    14. CS-14 Road Ripping
    15. CS-15 Road Pavement Layers
    16. CS-16 Kerb & Channel
    17. CS-17 Concrete Work
    18. CS-18 Carriageway Surfacing
    19. CS-19 Roadmarking
    20. CS-20 Berm Features
    21. CS-21 Street Structures
    22. CS-22 Road Maintenance
    23. CS-23 Grassing & Turfing
    24. CS-24 Vegetation Planting & Gardens
    25. CS-25 Reinstatement
  9. Inspection & Testing Requirements
    1. IT-1 General Provision
    2. IT-2 Streetscape
    3. IT-3 Reserves
    4. IT-4 Transportation Network
    5. IT-5 Stormwater
    6. IT-6 Wastewater
    7. IT-7 Water Supply
    8. IT-8 Public Lighting
    9. IT-9 Network Utilities
Infrastructure Development Code

DS-2.6 Street Gardens 


Drawing Ref: T211

The following shall apply:

  1. Street gardens shall be designed to be integral with the overall subdivisional streetscape and traffic management.
  2. A minimum 500mm deep layer of clean, friable peat loam or sandy loam topsoil free of all perennial weeds, stones and rubbish shall be placed on the subgrade.
  3. One or more street gardens shall be provided in the Road Zone where it can be visibly seen at the junction of all new roads.
  4. Plantings shall not exceed 450mm in height in the sight triangles of intersections and vehicle accessways. Street gardens shall be provided at intersections only where collector or arterial roads are also present.
  5. Street gardens located within the carriageway shall be specifically designed and submitted for approval. 

DS-2.6.1 Street Garden Location

The following shall apply:

  1. All street gardens shall be adjacent to a sub-collector, collector or arterial road
  2. Within each development, street gardens will be installed:
    1. At junctions between two arterial roads, or beside arterials roads.
    2. Between arterial and collector roads.
    3. At junctions between two collector roads or beside collector roads.
    4. At junctions between collector and local roads.
  3. In choosing the location of any garden consideration must be given to practical maintenance. The design and location of the garden shall be such that it shall be easily and safely accessed and maintained without the gardener coming into direct conflict with vehicular traffic during the maintenance period.
  4. Street gardens placed in private roads or lanes will not be maintained by Council

DS-2.6.2 Street Gardens on Roundabouts

Drawing Ref: T204T205T211

Roundabouts of less than 10.0m in diameter may have one single-trunked specimen tree which shall be centrally located and underplanted with grass or low planting.

Roundabouts over 10.0m in diameter shall comply with Council Vegetation Management Strategy.

DS-2.6.3 Garden Size

Drawing Ref: T211

The following shall apply:

  1.  The mature size of any tree or garden planting shall be:
    1. Assessed for each planting location.
    2. In scale with the permitted or anticipated adjacent environment.
  2. Tree planting shall provide for a clear trunk to a high canopy. In all cases planting shall not interfere with motorists’ sight lines.
  3. The following table shall apply for street garden design:
Design Consideration Minimum Maximum
Garden Size 45m² = 0.50m² per lin.m of the collector or arterial road.
Width for median strips and traffic islands - the minimum means that tapered ends will need to be hard surface. 1.5m Dependant on island design width.
Area of street gardens per lineal metre of primary arterial, secondary arterial or collector road in the subdivision. 0.40m² 0.50m²
Distance between plants in the garden: exceptions can be made for bulbs and some selected perennials. 0.5m 1.0m

Definitions in this section



Private road




Tauranga City Council, Private Bag 12022, Tauranga, 3143, New Zealand  |  Terms of use

Back To Top