IT-1.4 Asset Inspection/Testing Requirements

1. For the requirements of inspection/testing for each different asset group, refer to the following:
   1. IT-2 Streetscape.
   2. IT-3 Reserves.
   3. IT-4 Transportation Network.
   4. IT-5 Stormwater.
   5. IT-6 Wastewater.
   6. IT-7 Water Supply.
   7. IT-8 Public Lighting.
   8. IT-9 Network Utilities.
2. Unless advised by Council, all equipment required for the formal inspection/testing shall be provided by the Contractor and/or Engineer on-site and be ready for use for the inspection/test. This includes all equipment and requirements for confined space entry.
3. Where applicable, all inspections/tests shall be reported on Council's standard inspection/testing sheets and signed by:
   1. The Contractor’s Representative (as the party who constructed the works to be inspected/tested).
   2. The Engineer (as the party responsible for the certification of the works).
   3. Council’s approved representative (as the party acting as co-stakeholder for development of quality assets on Council’s behalf).
4. Where inspection/testing sheets are not provided, the results shall be formalised in writing by the Engineer and signed as per c) above.

Definitions in this section

Asset

Confined space

Contractor

Contractor's representative

Council

Engineer